Scaffolding Safety

Scaffold Safety:
4 Common Hazards and How to Reduce Exposure.

    Mostly of workers injured in scaffold accidents attributed the accident either to the planking or support giving way or to the employee slipping or being struck by a falling object. Scaffolds are integral to the construction industry with approximately 2/3 of the workforce involved in work from scaffolds.  When used properly, scaffolds can save significant time and money. Though they are convenient and necessary, there are four major hazards associated with worker injuries that everyone needs to be aware of proper scaffold safety.

4 Major Hazards: 

1. Falling:
Falling is attributed to the lack of guardrails, improper installation of guardrails and failure to use personal fall arrest systems when required.  The Safety standard requires fall protection must be used when work heights reach 1,8m  or more. Safety standards represent the minimum level of protection; many general contractors require fall protection when working on scaffolds.  These contractors are increasing safety margins by exceeding the minimum requirements of the Safety standards.

Lack of proper access to the scaffold work platform is an additional reason for falls from scaffolds.  Access in the form of a secured ladder, stair tower, ramp, etc. is required whenever there is vertical change to an upper or lower level. The means of access must be determined before the erection of the scaffold and employees are never allowed to climb on cross braces for either vertical or horizontal movement.

2. Scaffold collapse:
The proper erection of a scaffold is essential in preventing this particular hazard.  Before erecting the scaffold, a number of factors must be accounted for.  The amount of weight the scaffold will be required to hold including the weight of the scaffold itself, materials, and workers must be considered.  Foundation stability, placement of scaffold planks, distance from the scaffold to the work surface, and tie-in requirements are just a few of the other items that must be considered prior to build a scaffold.

Scaffold Competent Person

A knowledgeable individual who can perform preplanning will reduce the chances of injury and save money for any task. However, when building, moving or dismantling a scaffold, a knowledgeable person, also known as the scaffold competent person, must be present.  A competent person must also inspect the scaffold daily to ensure the structure remains in a safe condition. Improper construction can lead to a total collapse of the scaffold or falling components – both of which can be fatal.

3. Struck by falling materials:
Workers on scaffolds are not the only ones exposed to scaffold-related hazards.  Many individuals have been injured or killed due to being struck by materials or tools that have fallen from scaffold platforms.  These people must be protected from falling objects.  Safety requires that this is done one of two ways.  The first is to install the boards or netting on work platforms to prevent these items from falling to the ground or lower level work areas.  The other option is to erect barricades that physically prevent individuals from walking under work platforms.

Caution or Danger tape is often used in an attempt to keep people away from overhead hazards but is often disregarded or taken down creating possible struck by hazards.  A more robust system such as plastic mesh or wooden barricades is generally more effective and much easier to maintain.  When members of the public could potentially move close enough to be struck by falling objects, creating barriers to prevent them from entering the area where objects can fall is a recognized best practice.  Regardless of the type of falling object protection used, it is crucial that other individuals on the work site are aware of the overhead work.

4. Electrocution:
Once again we look to preplanning and the competent person to assure there are no electrical hazards present during scaffold use.  The safety distance must be maintained between the scaffold and electrical hazards.  If this distance cannot be maintained, then the hazard must be de-energized or properly insulated for using the scaffold cannot be overstated.

Lastly, all employees who work on scaffolds must have documented training.  The training topics must include identification and prevention of fall hazards, falling tools and materials hazards, and knowledge of electrical hazards.

Key Takeaways:

Fall protection is required when work heights reach 1,8m or more.
Provide proper access to the scaffold and never allow employees to climb on cross braces for horizontal or vertical movement.
The scaffold competent person must be present when building, moving or dismantling the scaffold and must inspect it daily.
Erect barricades to prevent individuals from walking.